Boss WL-50 Wireless Freedom for Pedalboards

With the WL-50, it’s never been easier to bring wireless freedom to your pedalboard. Driven by new BOSS technology, the WL-50 delivers premium sound and a plug-and-play experience that eliminates all the hassles normally associated with wireless systems. The stompbox-sized receiver fits right alongside your other pedals, and includes a docking port for charging the transmitter and automatically setting the best wireless connection. There’s even a handy DC output, allowing you to distribute power to multiple pedals on your board.

Once you experience the wireless independence provided by the WL-50, you’ll never go back to using a standard cable again! Setup is quick and simple, and you’re able to move about freely while playing at home, jamming with friends, and performing on stage. During sound check at a gig, you can listen to your tone out front and dial in the best sound for your audience. And with the ability to roam and interact with other musicians, your live shows will be more dynamic and entertaining than ever.

• Specifications (RECEIVER)
• Wireless Format
• BOSS proprietary digital audio format
• Wireless carrier frequency: 2.4 GHz
• Compatible Channels: 14
• (May vary due to local conditions)
• Transmission Range: 65 feet line-of-sight
• (May vary due to local conditions)
• Latency: 2.3 ms
• Dynamic Range: 110 dB or greater
• Frequency Response: 20 Hz--20 kHz
• Nominal Input Level: -10 dBu
• Input Impedance: 1 M ohm
• Nominal Output Level: -10 dBu
• Output Impedance: 1 k ohm
• Recommended Load Impedance: 10 k ohms or greater
• Controls: CABLE TONE switch (OFF/SHORT/LONG)
• Indicators: POWER RECEIVE
• Connectors: INPUT jack: 1/4-inch phone type
• OUTPUT jack: 1/4-inch phone type
• TRANSMITTER jack: 1/4-inch TRS phone type
• DC IN jack
• DC OUT jack
• Power Supply: Alkaline battery (AA, LR6) x 2
• AC adaptor (sold separately)
• Current Draw: During wireless operation: 60 mA
• While charging transmitter: 320 mA
• Expected battery life under continuous use
• Alkaline battery (AA, LR6): Approximately 10 hours
• * These figures will vary depending on the actual conditions of use.

Owner's Manual
Leaflet USING THE UNIT SAFELY
Transmitter
Rubber foot x 4
Alkaline battery (AA, LR6) x 2

An AC adaptor (PSA-S series) is required to charge the transmitter (WL-T).

Options (sold separately)

AC adaptor: PSA-S series
Parallel DC cord: PCS-20A (DC Plug x8)

Size and Weight (RECEIVER)

Width: 

72 mm
2-7/8 inches

Depth: 

121 mm
4-13/16 inches

Height: 

56 mm
2-1/4 inches

Weight (including battery): 

220 g
8 oz

Specifications (TRANSMITTER (WL-T))

Nominal Input Level: -10 dBu (1 M ohm)

Indicator: BATTERY

Connectors: Input plug: 1/4-inch TRS phone type

DC IN 5 V port: USB Micro-B type

Power Supply: Rechargeable lithium-ion battery

Supplied from the DC IN 5 V port

Current Draw: 350mA

Battery charging time: Approximately 3 hours

Expected battery life under continuous use: Approximately 12 hours

* These figures will vary depending on the actual conditions of use.

Size and Weight (TRANSMITTER (WL-T))

Width: 

87 mm
3-7/16 inches

Depth: 

22 mm
7/8 inches

Height: 

36 mm
1-7/16 inches

Weight: 

43 g
2 oz